点击图片查看原图
Length × width × height 5500mm×1300mm×1000mm
Molding shaft: diameter 70mm 45# steel
Molding wheel: Material 45# steel plated with hard chrome
Transmission mode: sprocket, chain
Automatic computer fixed length cutting system:
Pump station motor: 3KW level 4
Shear mold: Gr12
Motor: 3KW
Number of molding rows: 9 rows
Molding speed: 10-12m/min
Pressing thickness: 0.2-0.8mm
Pressing width: 1000mm
Effective plate width: 850mm
The side and end of the color plate lap.
The products produced by 850 color steel tile pressing machine equipment are used in various industrial plants, warehouses and other roofing production with the advantages of high crest, high strength, reliable lapping installation b2b商务 platform, strong waterproof anti-riot performance, etc., the machine produces the pressure plate to solve the leakage problem of the conventional series of pressure plate roof plate, with the arch machine can make no beam arch roof.
When installing each steel plate, the edge lap should be accurately placed on the previous steel plate and clamped with the previous steel plate until both ends of the steel plate are fixed. A simple and effective method is to use a pair of clamp pliers to clamp the bonded steel plate separately. In the south, the color plate is generally designed as a single-layer color plate, in order to reduce the solar radiation heat into the interior of the building, when installing the roof plate, you can install insulation in the roof system. A very simple, economical and effective method is to lay a double-sided reflective foil film on a purlin or slat before installing the roof steel plate, which can also be used as a steam isolation to reduce condensation
Tel: 15690126677 (wechat same number)